Compare Models: 2025 Exmark Lazer Z X-Series 72 in. Vanguard EFI 37 hp vs 2025 Exmark Lazer Z X-Series 72 in. Vanguard EFI 37 hp at Otsego Outdoor Power

2025 Exmark Lazer Z X-Series 72 in. Vanguard EFI 37 hp in Gaylord, Michigan — 2025 Exmark Lazer Z X-Series 72 in. Vanguard EFI 37 hp

View Details

Specs
Features

General Information

Manufacturer

Exmark

Model Year

2025

Model

Lazer Z X-Series 72 in. Vanguard EFI 37 hp

Model Code

LRX993EBX726Q1

Color

Red

Body

Frame

Tractor - Unibody, welded, heavy-duty 1.5 x 3 in. tubular steel

Caster forks - 0.50 in. thick caster yoke arms

Tractor - Unibody, welded, heavy-duty 1.5 x 3 in. tubular steel

Caster forks - 0.50 in. thick caster yoke arms

Seat

Deluxe, three-tone, bolstered suspension with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.

Rollover Protection (ROPS)

2-post foldable standard with seat belt and latch

Safety Features

Safety package - Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators

Drivetrain

Drive Type

Drive description - Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7 qt. integrated reservoir, spin-on filter and heavy-duty components. 16 cc pumps and 17.1 ci motors

Transmission/Drive

Hydro-Drive

Transmission Speed

Infinitely variable

Number of Speeds

Infinitely variable speed selection

Travel Speed Forward

0 - 11.5 mph (18.5 km/h)

Travel Speed Reverse

0 - 7.0 mph (11.3 km/h)

Drive Tires

24 x 12-12, 4 ply Grassmaster TL

Drive wheel release - Allows unit movement without engine running

24 x 12-12, 4 ply Grassmaster TL

Drive wheel release - Allows unit movement without engine running

Steering Tires

Front caster tires - 13 x 6.5-6, smooth tread, semi-pneumatic

Parking Brake

Lever actuated disc brake

Electrical

Battery

12V with 20A alternator

Instrumentation

Fuel indicator - Electronic sender

Hour Meter

Engine

Engine Make

Kohler

Engine Model

ECV980, Command Pro™ EFI Series

Horsepower

37 hp @ 3,600 rpm @ engine speed

Displacement

993 cc

Fuel System

Electronic Fuel Injection (EFI) system integrated throttle body, electronic governor and ECU

Air Cleaner

Air filter - Heavy-duty canister air filtration system

Starter

Electric

Fuel Type

Gas EFI

Fuel Capacity

12 gal. single fuel tank with single fill location

Measurements

Length

86.1 in.

Width

84.9 in.

Height

70.5 in.

Weight

Curb - 1,304 lb.

Mowing Width

72 in.

Mowing Height Range

1.0 - 5.5 in. in 0.25 in. increments

Mowing Height Adjustments

Adjustable from operator’s seat

Operational

Steering

Control - Hydraulically dampened twin levers adjustable both fore and aft. Also has 2-position height adjustment. Adjustable dampers (3 positions) to customize drive responsiveness

Deck Construction

10 ga. top that is formed and continuously seam welded, 7 ga. side skirt and 7 ga. formed and welded spindle mounting locations for improved strength and reduced weight

Deck style - Floating deck

Deck style description - Full-floating UltraCut Series 6 with heavy-duty spindle

10 ga. top that is formed and continuously seam welded, 7 ga. side skirt and 7 ga. formed and welded spindle mounting locations for improved strength and reduced weight

Deck style - Floating deck

Deck style description - Full-floating UltraCut Series 6 with heavy-duty spindle

Deck Lift

Standard; foot-controlled deck lift changes cutting height and lifts the deck to maneuver around obstacles, or place in transport position. Equipped with Adapt system.

Discharge

Side standard with the option to bag or mulch

Spindles

Blade - No maintenance, sealed and non-greasable; 7.75 in. diameter cutter housing with 1.18 in. (30 mm) diameter spindle shaft and splined blade driver

Blades

3 at 24.50 in. length

Blade Tip Speed

Approximately 18,500 fpm

Power Take-Off (PTO)

Engagement - MagStop electromagnetic 250 ft. lb. clutch with spot brake

Other

Includes

USB plug-in

Phone tray

Cup holder

USB plug-in

Phone tray

Cup holder

Features

ULTRACUT SERIES 6 DECK: Our full-floating side-discharge deck design uses dual-capture anti-scalp rollers and double-row sealed bearings for ultimate durability, with splined blade drivers to stop bolt tightening from impacts. Plus, our patented idler arm bearing design needs only annual service. (The 96-inch Flex Wing deck is a rear-discharge design.)
VANGUARD OIL GUARD SYSTEM: With oil change intervals of 500 hours, the Vanguard Oil Guard system increases mower uptime and decreases maintenance. Available on select Lazer Z X-Series models, the Oil Guard system also decreases engine oil temperature by 20-30 degrees.
ADAPT YOUR CUT: Adjust deck rake quickly and easily without tools, from the operator seat, to optimize cut quality and performance in a variety of turf types and conditions. Adapt is particularly useful when mowing in wet, overgrown, or lush conditions, or stemmy grasses and weeds.
EASY TO SERVICE: The new Lazer Z X-Series is easier than ever to service, thanks to a rear engine guard that removes with just four bolts. Plus, a redesigned seat mount enables easier access to the engine and hydro drive components. Tools-free deck and hydro belt installation further eases maintenance.
MAXIMUM PRODUCTIVITY: With a combination of increased power, faster control response, larger cutting decks and a high-capacity hydro drive system, Lazer Z X-Series delivers maximum productivity.
SUPERIOR OPERATOR COMFORT: Our new ergonomically-advanced operator seat features long-travel suspension and our exclusive iso-mount seat isolation. This seating system increases productivity by reducing operator fatigue, so each worker can work stronger, longer.

Features

ULTRACUT SERIES 6 DECK: Our full-floating side-discharge deck design uses dual-capture anti-scalp rollers and double-row sealed bearings for ultimate durability, with splined blade drivers to stop bolt tightening from impacts. Plus, our patented idler arm bearing design needs only annual service. (The 96-inch Flex Wing deck is a rear-discharge design.)
VANGUARD OIL GUARD SYSTEM: With oil change intervals of 500 hours, the Vanguard Oil Guard system increases mower uptime and decreases maintenance. Available on select Lazer Z X-Series models, the Oil Guard system also decreases engine oil temperature by 20-30 degrees.
ADAPT YOUR CUT: Adjust deck rake quickly and easily without tools, from the operator seat, to optimize cut quality and performance in a variety of turf types and conditions. Adapt is particularly useful when mowing in wet, overgrown, or lush conditions, or stemmy grasses and weeds.
EASY TO SERVICE: The new Lazer Z X-Series is easier than ever to service, thanks to a rear engine guard that removes with just four bolts. Plus, a redesigned seat mount enables easier access to the engine and hydro drive components. Tools-free deck and hydro belt installation further eases maintenance.
MAXIMUM PRODUCTIVITY: With a combination of increased power, faster control response, larger cutting decks and a high-capacity hydro drive system, Lazer Z X-Series delivers maximum productivity.
SUPERIOR OPERATOR COMFORT: Our new ergonomically-advanced operator seat features long-travel suspension and our exclusive iso-mount seat isolation. This seating system increases productivity by reducing operator fatigue, so each worker can work stronger, longer.