Compare Models: Generac 1 in. Clean Water Pump vs Generac 1 in. Clean Water Pump at Otsego Outdoor Power

Generac 1 in. Clean Water Pump in Gaylord, Michigan — Generac 1 in. Clean Water Pump

View Details

Specs
Features

General Information

Manufacturer

Generac

Model

1 in. Clean Water Pump

Model Code

G0069170

Color

Orange / Black

Dimensions

Weight

Unit - 16.5 lb. (7.5 kg)

Engine

Fuel Tank Capacity

0.17 gal. (0.65 l)

Engine

33.5 cc (2 ci)

Starting System

Recoil

Operational

Flow

Max. - 30 gpm (114 lpm)* (*Total head and flow are dependent on location to water source, length and material of hoses, etc.)

Total Head Lift

Max. - 100 ft. (30.5 m)* (*Total head and flow are dependent on location to water source, length and material of hoses, etc.)

Suction Head Lift

Max. - 26 ft. (8 m)* (*maximum suction head is reduced at high elevations. See high altitude operation in owner's manual.)

Discharge Port

1.0 in. NPT

Features

Lightweight design with ergonomic carry handle.
Powerful Generac 33CC engine.
Onboard instructions with icons of key touch points make this pump easy to use.
Easy Prime™ custom funnel design with tethered priming cap for quick and easy priming.
Color-coded suction and discharge ports to ensure the correct hose connections (Blue = Discharge; Green = Suction).
Easily pumps up to 30 gallons per minute.
All-inclusive kit includes 10’ suction hose, 25’ discharge hose, and strainer.
Spark plug type - CMR6A/AL6RC.
Spark plug gap - 0.023 - 0.028 in. (0.6 - 0.7 mm).
Oil capacity - 3.4 oz. (0.1 l).
Lifting handle - Used to lift the water pump.
Discharge port - Location to attach discharge hose.
Suction port - Location to attach suction hose.
Water drain plug - Used to empty the water pump after use.
Oil fill / Drain - Check and add engine oil.
Muffler - Where hot exhaust gas exits the water pump engine.
Fuel tank - Fill tank with regular unleaded fuel. Always leave room for fuel expansion.
Choke - Prepares a cold engine for starting.
Air filter - Protects engine by filtering dust and debris out of the intake air.
Recoil starter - Used for starting the engine.
Engine OFF switch - Push switch to stop engine.
Priming cap - Remove cap and fill the pump with water before starting the unit.
Serial number location.
Discharge hose - Used to discharge water from the pump.
Hose clamps - Secure the hose to the hose barbs and the filter.
Hose nut - Secures the hose barb to the pump.
Hose barb - Holds the hose to the pump.
Sealing ring - Prevents leaking.
Suction hose - Used to bring water into the pump.
Strainer attachment - Used to connect filter basket to the suction hose.
Strainer - Used to keep debris out of the pump.

Features

Lightweight design with ergonomic carry handle.
Powerful Generac 33CC engine.
Onboard instructions with icons of key touch points make this pump easy to use.
Easy Prime™ custom funnel design with tethered priming cap for quick and easy priming.
Color-coded suction and discharge ports to ensure the correct hose connections (Blue = Discharge; Green = Suction).
Easily pumps up to 30 gallons per minute.
All-inclusive kit includes 10’ suction hose, 25’ discharge hose, and strainer.
Spark plug type - CMR6A/AL6RC.
Spark plug gap - 0.023 - 0.028 in. (0.6 - 0.7 mm).
Oil capacity - 3.4 oz. (0.1 l).
Lifting handle - Used to lift the water pump.
Discharge port - Location to attach discharge hose.
Suction port - Location to attach suction hose.
Water drain plug - Used to empty the water pump after use.
Oil fill / Drain - Check and add engine oil.
Muffler - Where hot exhaust gas exits the water pump engine.
Fuel tank - Fill tank with regular unleaded fuel. Always leave room for fuel expansion.
Choke - Prepares a cold engine for starting.
Air filter - Protects engine by filtering dust and debris out of the intake air.
Recoil starter - Used for starting the engine.
Engine OFF switch - Push switch to stop engine.
Priming cap - Remove cap and fill the pump with water before starting the unit.
Serial number location.
Discharge hose - Used to discharge water from the pump.
Hose clamps - Secure the hose to the hose barbs and the filter.
Hose nut - Secures the hose barb to the pump.
Hose barb - Holds the hose to the pump.
Sealing ring - Prevents leaking.
Suction hose - Used to bring water into the pump.
Strainer attachment - Used to connect filter basket to the suction hose.
Strainer - Used to keep debris out of the pump.