Compare Models: 2025 Exmark Lazer Z X-Series 96 in. Kohler EFI 38 hp vs 2025 Exmark Lazer Z X-Series 96 in. Kohler EFI 38 hp at Otsego Outdoor Power

2025 Exmark Lazer Z X-Series 96 in. Kohler EFI 38 hp in Gaylord, Michigan — 2025 Exmark Lazer Z X-Series 96 in. Kohler EFI 38 hp

View Details

Specs
Features

General Information

Manufacturer

Exmark

Model Year

2025

Model

Lazer Z X-Series 96 in. Kohler EFI 38 hp

Model Code

LZX980EKC96RW0

Color

Red

Body

Frame

Tractor - Unibody, welded, heavy-duty 1.5 x 3 in. tubular steel

Caster forks - 0.50 in. thick caster yoke arms

Tractor - Unibody, welded, heavy-duty 1.5 x 3 in. tubular steel

Caster forks - 0.50 in. thick caster yoke arms

Seat

Deluxe, two-tone, bolstered suspension with Elastomeric Vibration Control material. Mounted on innovative Seat Isolation System that provides operator isolation in all three planes of motion as well as fore-aft slide and seat flip-up.

Rollover Protection (ROPS)

2-post foldable standard with seat belt and latch

Safety Features

Safety package - Operator Presence Controls (OPC) and drive system interlock, with safety interlock system indicators

Drivetrain

Drive Type

Drive description - Two Exmark exclusive Parker unitized pump and wheel motor systems with no hoses, integrated cooling fans, shock valve, 1.7 qt. integrated reservoir, spin-on filter and heavy-duty components. 16 cc pumps and 18 ci motors

Transmission/Drive

Hydro-Drive

Transmission

Hydrostatic

Transmission Speed

Infinitely variable

Number of Speeds

Infinitely variable speed selection

Travel Speed Forward

0 - 10.5 mph (16.8 km/h)

Travel Speed Reverse

0 - 6.0 mph (9.7 km/h)

Drive Tires

24 x 12.0-12, 4-ply Turf Master®

Drive wheel release - Allows unit movement without engine running

24 x 12.0-12, 4-ply Turf Master®

Drive wheel release - Allows unit movement without engine running

Steering Tires

Front caster tires - 13 x 6.5-6, smooth-tread, semi-pneumatic

Parking Brake

Lever-actuated disc brake

Electrical

Battery

12V with 40A alternator

Instrumentation

Fuel indicator - Electronic sender

Onboard intelligence - RED Technology

Fuel indicator - Electronic sender

Onboard intelligence - RED Technology

Hour Meter

Engine

Engine Make

Kohler

Engine Model

ECV980, Command Pro™ EFI series

Gross Horsepower

38 hp @ 3,650 rpm engine speed

Displacement

999 cc

Fuel System

Electronic throttle body

Air Cleaner

Air filter - Heavy-duty canister air filtration system

Starter

Electric

Fuel Type

Gas EFI

Fuel Capacity

12 gal. (45.4 l) single fuel tank with single fill location

Measurements

Length

95.8 in. (243.3 cm)

Width

101.3 in. (257 cm), 72.5 in. @ 3 in. HOC when folded

Height

70.5 in. (179.1 cm)

Weight

Curb - 2,200 lb.

Mowing Width

96 in.

Mowing Height Range

1.0 - 5.5 in. (2.5 - 11.8 cm) in 0.25 in. (0.64 cm) increments

Operational

Steering

Control - Hydraulically dampened twin levers, adjust fore and aft. Adjustable dampeners (3 positions) to customize drive responsiveness. Also adjustable to 2 height positions.

Deck Construction

7 ga. high strength alloy top that is formed and continuously seam welded, with 7 ga. high strength alloy side skirt

Deck style - Floating deck

Deck style description - Full-floating Ultracut rear discharge deck

7 ga. high strength alloy top that is formed and continuously seam welded, with 7 ga. high strength alloy side skirt

Deck style - Floating deck

Deck style description - Full-floating Ultracut rear discharge deck

Deck Lift

Electric over hydraulic push button control

Discharge

Finish cut baffles installed standard, rear discharge improvement baffles available via kit

Spindles

Blade - No maintenance, sealed and non-greasable; 7.75 in. diameter cutter housing with 0.98 in. (25 mm) diameter spindle shaft, double row bearings, top and bottom, and splined blade driver

Blades

4 at 24.50 in. length

Blade Tip Speed

Approximately 18,500 fpm

Power Take-Off (PTO)

Engagement - MagStop electromagnetic 250 ft. lb. clutch with spot brake

Other

Includes

Cup holder

Features

ULTRACUT SERIES 6 DECK: Our full-floating side-discharge deck design uses dual-capture anti-scalp rollers and double-row sealed bearings for ultimate durability, with splined blade drivers to stop bolt tightening from impacts. Plus, our patented idler arm bearing design needs only annual service. (The 96-inch Flex Wing deck is a rear-discharge design.)
VANGUARD OIL GUARD SYSTEM: With oil change intervals of 500 hours, the Vanguard Oil Guard system increases mower uptime and decreases maintenance. Available on select Lazer Z X-Series models, the Oil Guard system also decreases engine oil temperature by 20-30 degrees.
ADAPT YOUR CUT: Adjust deck rake quickly and easily without tools, from the operator seat, to optimize cut quality and performance in a variety of turf types and conditions. Adapt is particularly useful when mowing in wet, overgrown, or lush conditions, or stemmy grasses and weeds.
EASY TO SERVICE: The new Lazer Z X-Series is easier than ever to service, thanks to a rear engine guard that removes with just four bolts. Plus, a redesigned seat mount enables easier access to the engine and hydro drive components. Tools-free deck and hydro belt installation further eases maintenance.
MAXIMUM PRODUCTIVITY: With a combination of increased power, faster control response, larger cutting decks and a high-capacity hydro drive system, Lazer Z X-Series delivers maximum productivity.
SUPERIOR OPERATOR COMFORT: Our new ergonomically-advanced operator seat features long-travel suspension and our exclusive iso-mount seat isolation. This seating system increases productivity by reducing operator fatigue, so each worker can work stronger, longer.

Features

ULTRACUT SERIES 6 DECK: Our full-floating side-discharge deck design uses dual-capture anti-scalp rollers and double-row sealed bearings for ultimate durability, with splined blade drivers to stop bolt tightening from impacts. Plus, our patented idler arm bearing design needs only annual service. (The 96-inch Flex Wing deck is a rear-discharge design.)
VANGUARD OIL GUARD SYSTEM: With oil change intervals of 500 hours, the Vanguard Oil Guard system increases mower uptime and decreases maintenance. Available on select Lazer Z X-Series models, the Oil Guard system also decreases engine oil temperature by 20-30 degrees.
ADAPT YOUR CUT: Adjust deck rake quickly and easily without tools, from the operator seat, to optimize cut quality and performance in a variety of turf types and conditions. Adapt is particularly useful when mowing in wet, overgrown, or lush conditions, or stemmy grasses and weeds.
EASY TO SERVICE: The new Lazer Z X-Series is easier than ever to service, thanks to a rear engine guard that removes with just four bolts. Plus, a redesigned seat mount enables easier access to the engine and hydro drive components. Tools-free deck and hydro belt installation further eases maintenance.
MAXIMUM PRODUCTIVITY: With a combination of increased power, faster control response, larger cutting decks and a high-capacity hydro drive system, Lazer Z X-Series delivers maximum productivity.
SUPERIOR OPERATOR COMFORT: Our new ergonomically-advanced operator seat features long-travel suspension and our exclusive iso-mount seat isolation. This seating system increases productivity by reducing operator fatigue, so each worker can work stronger, longer.